Showing posts with label George Douglass Taylor. Show all posts
Showing posts with label George Douglass Taylor. Show all posts

Tuesday, November 17, 2026

George Taylor's Three-Day Market Cycle

George Douglass Taylor was a Chicago Board of Trade grain trader whose meticulous market records led him to formulate the three-day "Book Method," published in The Taylor Trading Technique in 1950. His contribution was a practical way to study recurring short-term market behavior, identify likely buying and selling phases, and organize daily price action—a framework that remains useful to short-term traders of futures and equities.
 
Idealized Taylor Three-Day Market Cycle: The Buy Day establishes a low and recovers; the following sessions test progressively higher reference points, with the Sell Short Day challenging the Sell Day high before retreating (bars are schematic, not historical market data).
The Three-Day Market Cycle
Taylor organized short-term market behavior into three recurring phases: the Buy Day, the Sell Day, and the Sell Short Day. The framework is intended to help a trader anticipate where buying or selling pressure may emerge, rather than simply react to each new price movement.

Taylor's notebook was a systematic analytical record of daily OHLC prices, successive rallies
and declines, intersession price relationships, and key buying and selling objectives.

The Buy Day is associated with a decline toward a potential low and a buying opportunity. The Sell Day follows, when a rally may offer an opportunity to sell or reduce a long position. The Sell Short Day is associated with a rally toward a potential high, where a short-selling opportunity may develop. The sequence then returns to the next Buy Day.
Buy Day: End of a decline (usually after 1–3 high-to-low days). Expect a test below the prior day's low that fails (excess low), then a rally. Buy the rejection of the prior low; hold for residual strength into the next day(s). Avoid if the low is accepted and price keeps falling.

Sell Day: Residual momentum day after the Buy Day. Expect price to work higher toward or through the prior day’s high as longs are liquidated. Scale out or exit longs into strength; do not initiate new longs late. Range or modest upside is normal.

Sell Short Day: End of a rally (mirror of Buy Day). Expect a test above the prior day's high that fails (excess high), then a decline. Short the rejection of the prior high; target the subsequent pullback. Avoid if the high is accepted and price keeps rising.  
The cycle is a market-timing framework, not a mechanical three-session forecast. Taylor's original method allows for variations, and the sequence may need to be suspended or reset when price action does not conform to expectations.
 
 » Very few people can blindly follow a system. Many find it easier to be discretionary in a systematic way. «
 
 Day 1: Frontside: Luring traders onto the "escalator." Day 2: Peak formation: The final trap. 
Day 3 / Day 1: Consolidation: The pressure builds. Day 2: Backside rapid descent.
Classic Pump-Coil-and-Dump pattern. The inverse pattern is: Dump-Coil-and-Pump.
The Stacey Burke way to trade the Taylor Cycle.
 
The Importance of the Intraday High-Low Sequence
Taylor did not record only each day's high, low, open, and close. He also noted whether the day's high or low occurred first. This distinction matters because two sessions can produce identical OHLC values but follow very different intraday paths. 
 
Intraday Sequencing within the Three-Day Cycle. The ideal Buy Day makes its low first and then recovers. On Sell Days and Sell Short Days, Taylor tracked whether the high occurred early or late, comparing the observed sequence with the expected behavior of that phase. The timelines are explanatory schematics, not fixed intraday rules.
In Taylor's notation, the order of the high or low was part of the record, not a decorative detail. When the expected sequence failed to appear, he could adjust the cycle count rather than force the market into a predetermined three-day pattern.
 
The Transition Between Cycles
The Sell Short Day of one cycle can also become the Buy Day of the next if the decline is deep enough and price action at the lows provides a qualifying reversal. The three-day sequence should therefore be read as a repeating market rhythm whose turning points are established by price behavior, not simply by counting calendar sessions.
 
The cycle reset. A Sell Short Day can roll into the next Buy Day when the decline creates a new low and the market shows a reversal. The reset is conditional; it is not automatic merely because the third day has ended.
Measuring Daily Price Movement
The envelope calculations translate recent price movement into projected levels for the next session. They use four interday measurements—Rally, Decline, Buying High, and Buying Under—together with a daily pivot derived from the latest completed session. 
 

For the envelope method presented here, calculate a three-session average for each of the four movement measurements. Apply those averages to the latest completed day's high or low to project the next session's levels. The daily pivot is calculated separately from that session's high, low, and close.
 
The Buy Envelope: Projected Support
The Buy Envelope contains four reference levels. Two are projected using the three-session averages; the third is the latest session's low; and the fourth is the Pivot Breakout Sell level.
 

The Decline level projects support by subtracting the average Decline Number from the latest high. The Buying Under level projects from the latest low. Buying Under can be negative when today's low is higher than yesterday's low, so retain the signed value when calculating its average.
 
The latest low provides a direct reference to the completed session. The Pivot Breakout Sell level may act as resistance; if price breaks above it, the former resistance may become support. 
 
The Sell Envelope: Projected Resistance
The Sell Envelope also contains four reference levels. Two are projected using the three-session averages; the third is the latest session's high; and the fourth is the Pivot Breakout Buy level. 
 

The Rally level adds the average Rally Number to the latest low. The Buying High level adds the average Buying High to the latest high. The latest high provides a direct reference to the completed session. The Pivot Breakout Buy level may act as support; if price breaks below it, the former support may become resistance.
 
 
These are price references, not standalone trade signals. Their significance depends on how price behaves as it approaches or crosses them.
 
Combining the Envelopes and Additional Price References
Together, the Buy and Sell Envelopes define a projected support-and-resistance framework for the next trading session. The lower envelope identifies areas where support may develop; the upper envelope identifies areas where resistance may emerge. The distance between the two gives a projected trading range based on the preceding three sessions' measured price movements.
 
Other price-reference techniques can be plotted alongside the envelopes to identify potential confluence. They should remain clearly identified as supplementary methods rather than being presented as components of Taylor's original three-day cycle. 
 

Practical Interpretation
The framework combines market timing with price projection. Taylor's cycle supplies context for anticipating likely buying and selling phases; the envelopes translate recent price movement into specific support and resistance references; and supplementary pivot methods can show whether independent calculations cluster around the same prices.
 
Confluence can make a price area more worthy of attention, but it does not guarantee a reversal. Evaluate the market's response at the level: does price reject it, accept it, break through it, or fail to follow through? The calculations are made after the session closes, using completed daily OHLC data, and are projected onto the next trading session.
 
The central principle is to anticipate the market's rhythm, map its likely trading boundaries, and judge the quality of an opportunity by the way price behaves at those levels.
 
 Toby Crabel's Daily Taylor Levels. 
 
Reference:
 
» There are only two ways a short-term high or low is broken. « 

Tuesday, June 18, 2024

George Taylor's Three-Day Trading Cycle | Scott Hoffman

In my opinion, George Douglass Taylor was one of the greatest trading thinkers, and luckily he left behind one book on trading: 'The Taylor Trading Technique' (1950). This book lays out his 'Taylor Book Method' for swing trading in futures. Taylor postulated that the markets had patterns based on "market engineering" from the "powers that be" in the grain markets. These insiders would frequently cause prices to decline to set up a buying opportunity for themselves. Then, after the market rallied sufficiently to yield profit for these insiders, a short-term top was created to give them a selling opportunity. The market would sell off, and the cycle would start again. 
 
George Douglass Taylor was a grain trader in the 1940s and 1950s at the CBOT pit
and is credited original author of the 3 Day Cycle Short-Term Trading System.

The effect of this engineering was to amplify the natural rhythm of the market, creating false moves that would fool traders into buying when they should be selling, and vice versa. The thrust of the Taylor Technique is to identify this rhythm and take advantage of the "false moves". I have long maintained that if an individual could identify moves in the market that would serve to inflict the most pain on unwary traders then they would have a great trading system. I believe the Taylor Technique does that. Taylor created this method for the grain futures markets, but I find it equally applicable in the financial futures markets today. 
 
George Taylor's Three-Day Trading Cycle.

George Douglass Taylor’s system of short-term swing trading is based on the premise that the market moves in two to three day timeframes, moving from a low to a high and back to a low. The other important concepts are the importance of the previous day’s high and low, the length of upswings relative to downswings, and being a solely technical trader (ignoring fundamentals).
Buy Day: End of a decline (usually after 1–3 high-to-low days). Expect a test below the prior day's low that fails (excess low), then a rally. Buy the rejection of the prior low; hold for residual strength into the next day(s). Avoid if the low is accepted and price keeps falling.

Sell Day: Residual momentum day after the Buy Day. Expect price to work higher toward or through the prior day’s high as longs are liquidated. Scale out or exit longs into strength; do not initiate new longs late. Range or modest upside is normal.

Sell Short Day: End of a rally (mirror of Buy Day). Expect a test above the prior day's high that fails (excess high), then a decline. Short the rejection of the prior high; target the subsequent pullback. Avoid if the high is accepted and price keeps rising. 
Cycle Day #1 – Buy Day
The first day of the cycle is the buying day. Look for a Buy Day two days after a swing high (the highest high of the past few days). On a Buy Day, look for the market to make its lows first, finding support around yesterday’s low. If the market opens flat to higher, look to buy the first sell off towards the previous low. If the market trades under yesterday’s low, be careful about going home long. The market should close higher than where it opened. If it is making new lows late in the day, it is usually best to exit. You can often get in the next day at a better price.
 
Cycle Day #1 - Buy Day

Generally, it’s good rule of thumb not to buy late in the day on a buy day if the market is heading lower or closing lower than where it opened. Odds favor a lower opening the next day, giving you a better enter price. Likewise, if the market is going to close lower than it opened, don’t be afraid to liquidate your position. Odds are in your favor that you’ll be able to buy at a lower price the next day.

Cycle Day #2 – Sell Day
If you are long and the market is closing in your favor, carry your long position overnight. Odds favor a higher opening the next day setting up the Sell Day, the second day of the cycle. On the Sell Day you should look to sell into strength, liquidating your position, and going home flat. Often, the sell day trades on both sides in what I call a 'fade' day. A fade day often follows a trend day and can be traded from either side.

 Cycle Day #2 - Sell Day

Cycle Day #3 – Sell Short Day
The third day of the cycle is the Sell Short Day. The Sell Short Day is the mirror image of the buying day. On a sell short day, you should be looking to sell early morning resistance, looking for resistance around the previous day’s high. The market should not be making highs late in the day, if it is you should be able to get a better entry point the next day. On a Sell Short Day, the market should close lower than it opened. The Sell Short Day is often followed by a 'Fade' day.
 
Cycle Day #3 - Sell Short Day.

That is the gist of Taylor’s technique - a rhythm of buy-sell-sell short. I don’t always recognize where we are in Taylor’s cycle (you’re always learning!), but on days when it is clear, at the least it gives you a good indication of the market’s bias for that day. In swing trading, the relation of the open to the close should indicate the direction of the next morning’s opening. This helps you determine whether the odds favor being a buyer or a seller on a given day.

Reference:
  
See also:
 
In this short video Marv Eisen explains the Taylor Trading Technique as a mathematical model that helps traders predict price movements in futures and stock markets. The technique focuses on the Three-Day Market Cycle to determine optimal buying and selling zones.


Key Components of the Technique:
►Buy Envelope (Support): Comprised of four calculated numbers including the decline number, the buying under number, today's low, and the pivot breakout sell number. These identify potential support levels for the following day.
►Sell Envelope (Resistance): Comprised of four calculated numbers including the rally number, the buying high number, today's high, and the pivot breakout buy number. These identify potential resistance levels for the following day.

Core Calculations:
The system relies on calculating specific price differences based on previous market data, often using a three-day average to smooth out volatility:
►Rally Number: The difference between today's high and yesterday's low.
►Decline Number: The difference between yesterday's high and today's low.
►Buying High Number: The difference between today's high and yesterday's high.
►Buying Under Number: The difference between yesterday's low and today's low.
►Pivot Breakout Number: A threshold calculated using the average of the day's high, low, and close, which, if breached, shifts the market's support or resistance.

By comparing the buy envelope and the sell envelope, traders can discern the expected trading range for the following day.

Sunday, June 16, 2024

Complete Three-Day Cycle Short-Term Trading System | Cameron Benson


Back in the 1950s George Douglass Taylor was a pit trader and he is the original author of the 3-Day Cycle. He watched the people trading larger capital and started to notice a rhythmic 1, 2, 3 to the markets. He used these rhythmic studies to develop the 3-Day Cycle Short-Term Trading System.
  1. A Buy Day (Day 1) occurs after 1-5 Days of decline, when a market that has opened, made its low in the morning, and closed in the upper third of the days range.
  2. Then follows the Sell Day (Day 2) which in fact (contrary to what its name suggests) rallies higher above Day 1 and one could already cover long positions on that day. However, if the 'Sell Day' has a strong close, a directional follow through could occur the next day (Day 3/1).
  3. The Sell Short Day (Day 3) could come immediately following the Buy Day (Day 1), if price action presents in the opposite direction. However, after Day 1 the market could also move higher for 2-3 days before printing new highs in the morning, and close in the lower third of the days range. If you ever notice a market breaking out for 4, 5, 6, 7, 8 days in one direction, it's probably because it is breaking out of a larger structural pattern. [...] 
 » Once you see it, you can't unsee it. «

 
» The largest Aha moment I ever had when I started trading the 3 Day Cycle strategy was that the above three things can be traded completely different. It is massively important to your understanding of this style of trading:

(1.) 3 Day Setups using signal days (previous day's high and low, inside day, first green/red day).
(2.) Weekly Template.
(3.) 3 Day Cycle.
 
All three can also be mashed together into one big trading strategy that will present setups for parabolic trend trades, short squeeze, long squeeze, and some other setups that can help you get into the trade. « - Cameron Benson, 2023 

 

Thursday, April 27, 2023

The Three-Day Cycle | Cameron Benson

 
The 3 Day Cycle  is a recurring market cycle, that when identified, can be the groundwork of a trade setup. It consists of 3 days, and begins with a false break at the current weeks high or low. In his Best Trade Setups Playbook Stacey Burke described the 3 Day Cycle setups as either pump and dumps, or dump and pumps: "They [the market makers] pump, pump, pump, go sideways and drop a bit, one more small pump, then a dump. The dump can go straight down, fast. The pump up, may often be hard to trade on the first day, the price action can be choppy, and back and forth, a slow grinding auction. Other times, you are forced to "chase the move."  

 
Finding Day 1:
Look for a false break above or below a previous day's high or low AT THE HIGH OR LOW OF THE WEEK.

Attributes of Day 1:
1. Breaks Below/Above Previous Days High or Low at the high of the week, and the day closes back inside of previous days range.
a. Sub Variation: Breaks through previous days level and days closes above/below that level. 
The following day, price comes back inside of the the range from 2 days ago and closes.
2. Can become a First Green Day or First Red Day (Signal for following day).
3. Day 3 sometimes turns into Day 1 at the close of the day.


 
 Attributes of Day 2 of the 3 Day Cycle:

Day 2 can be either
1. Continuation in direction of false break; or:
2. It can turn into ...
    a.) a First Red Day (FGD)
    b.) a First Green Day (FRD)
    c.) an Inside Day
    d.) a Trend Day

Areas of Interest:
1. High of the Day/Low of the Day (HOD/LOD)
2. High of the Session/Low of the Session (HOS/LOS)
3. Outside Day/Inside Day (Was there a false break?) (Act as Support/Resistance)
4. Low Bear/High Bull (Support/Resistance)

Day 2 Trade Setups:
- Long/Short Squeeze
- Parabolic Trend Trade
- High of the Session/Low of the Session (HOD/LOD) Trade
- High of the Day/Low of the Day (HOD/LOD)
- Low Hanging Fruit (LHF) Continuation (Trend Trade)

Method:
1. Support/Resistance References:
a. Low Bear/High Bull
b. Previous Days High/Low
c. HOD/LOD
2. Measure 3 Levels of rise/fall from Low/High of day for potential strike zone.
3. Use Support/Resistance References as additional confluence.
 
 
Attributes of Day 3 of the 3 Day Cycle:

1. Day 3 is the last day of the 3 Day Cycle.
2. A lot of times Day 3 can turn into Day 1, either on the current day or the next day 
(Reset of the Day Count).
3. Day 3 can either become a blow off trend continuation day (in the direction of the trend) or a reversal day.

Trade Setups:
1. Parabolic/Capitulation Trend
2. Reversal HOW/LOW
3. LHF Continuation (Trend Trade)

Areas of Interest:
1. Low/High of week
2. Previous Days High/Low (Support/Resistance/Trapped Volume)
3. High/Low of Day
4. High Bull/Low Bear (Support/Resistance)
5. OD/ID (Outside Day/Inside Day)

Reference:
 

See also:

The Three-Week Cycle | Cameron Benson

 
There are multiple ways of Week 1 taking place: 

1.) Price breaks out and fails at the High/Low of the month above or below a previous weeks high/low.
2.) A 3 Week Cycle has completed (gone through week 1,2,3), but has not reversed on week 3. 
I refer to this as a "revolving door" style a.k.a. Trending Model of the 3 week cycle.
3.) A breakout occurs above/below previous weeks level, and on the following week reverses back above/below that level.
4.) On week 3 the market reverses BUT on the following week the market continues in the previous direction (a.k.a. Reset). 
 
 
 
See also: